Services
Custom Fabrication
For Process Industries
From single pressure vessels to complete skid-mounted systems — built to your drawings, your specifications, and your timeline.
Process Equipment
Pressure Vessels
01
Vertical and horizontal designs
Jacketed vessels, limpet-coil vessels, and dished-end tanks fabricated to client drawings and ASME / IS codes as applicable.
02
Materials: CS, SS 304 / 316 / 316L
Pressure-grade carbon steel and stainless steel as standard. Duplex and non-ferrous on project basis.
03
IBR compliance facilitated
Third-party inspection and IBR documentation coordinated for boiler and statutory pressure vessel requirements.
Process Equipment
Heat Exchangers
01
Shell & tube, finned tube, double-pipe
Suitable for condensers, reboilers, coolers, and heaters in continuous process plants.
02
Carbon steel and stainless steel
SS 304, 316, 316L for corrosive services. CS for standard process duties.
03
Fixed tubesheet, floating head, U-tube
Multiple configurations built to client specification and TEMA standards on request.
Process Equipment
Columns & Reactors
01
Distillation and absorption columns
Tall vertical vessels with internal tray or packing support for chemical, fertilizer, and petrochemical plants.
02
Reaction vessels and agitated reactors
Fabricated to process datasheets with nozzle orientations, agitator mountings, and jacket arrangements.
03
Multi-material construction
CS, SS 304/316, and clad plate combinations depending on service conditions and client specification.
Storage
Storage Tanks
01
Buffer, oxygen, and nitrogen tanks
General industrial liquid and gas storage vessels fabricated to client capacity and pressure requirements.
02
Carbon steel and stainless steel
CS for standard storage. SS 304/316L for corrosive, food-grade, or hygienic applications.
03
Variety of capacities and orientations
Vertical and horizontal tanks with full nozzle, manway, and access requirements built in.
Process Equipment
Vacuum Vessels & Jacketed Storage
01
Vacuum-rated vessels
Fabricated for processes operating below atmospheric pressure — distillation, vacuum drying, and degassing applications.
02
Jacketed and limpet-coil designs
External heating and cooling via full jackets or limpet coils for temperature-controlled storage and process vessels.
03
SS 304 / 316 / 316L and carbon steel
Material selected to vacuum rating, service fluid, and temperature requirements. Documentation provided to client spec.
Pharmaceutical
Pharma Equipment
01
GMP-compliant vessels and reactors
Fabricated in SS 316L with crevice-free welds, electropolished or mirror-polished internals as required.
02
Hygienic design
Full-drain slope, sanitary nozzles, and surface finish standards suited to pharmaceutical and biotech applications.
03
Documentation support
Material test reports, weld records, and inspection certificates provided for GMP audit trails.
Forming
Shell Rolling & Formed Components
01
Cylindrical shells, cones, and dished ends
In-house rolling and forming on four plate bending machines covering 4mm to 20mm thickness.
02
Extended capacity via associate works
Plates up to 36mm thickness and 3000mm width rolled at Makarpura GIDC facility, Vadodara.
03
MS and SS plate forming
Both carbon steel and stainless steel formed components produced to dimensional drawings.
16mm thick shell, >4m diameter — rolled in-house
Water Treatment
WTP / ETP Systems
01
Tanks, filter vessels, and clarifiers
Fabricated steel components for water treatment plants and effluent treatment plants.
02
Structural skids and supports
Skid-mounted assemblies and structural steelwork for packaged WTP/ETP installations.
03
CS and SS construction
Material selection matched to treatment chemistry — CS for standard duty, SS for aggressive effluent service.
Structural
Industrial Chimneys
01
Fabricated steel exhaust stacks
Self-supporting and guyed chimneys for boilers, furnaces, generators, and process plant exhausts.
02
Various diameters and heights
Designed to client specifications. Flange joints, access doors, and ladder attachments fabricated as required.
03
Carbon steel construction
IS 2062 grade mild steel with appropriate surface preparation and coating for outdoor service.
Capabilities
Materials & processes
Carbon & Mild Steel
IS 2062, IS 516 grades for general industrial fabrication and structural applications.
Stainless Steel
SS 304, 316, and 316L for corrosion-resistant and hygienic applications.
Non-Ferrous Metals
Copper, brass, and aluminium for heat exchangers and specialised process equipment.
Welding Processes
SMAW, GTAW (TIG), and GMAW (MIG) performed by experienced in-house welders.
Plate Cutting
CNC plasma and gas cutting for complex profiles, nozzle openings, and precise blanks.
Shell Rolling
In-house rolling for cylindrical shells across a wide range of diameters and wall thicknesses.
Lifting
10T and 5T electric gantry cranes for safe handling throughout the shop and at dispatch.
NDT & Hydro-test
UT, RT, and dye-penetrant NDT via empanelled TPI agencies. TPIA witness available on request.
Industries
Industries we serve
Chemicals
- ▸ Process vessels & reactors
- ▸ Agitators & columns
- ▸ Rolled shells
Oil & Gas
- ▸ Pressure vessels & separators
- ▸ Distillation columns
- ▸ Rolled shells
Fertilizers
- ▸ Absorption columns
- ▸ Reaction vessels
- ▸ Heavy plate equipment
Power Generation
- ▸ Boiler drums & headers
- ▸ Pressure parts
- ▸ Heat exchangers
Heavy Engineering
- ▸ Heavy fabrication
- ▸ Rolled components
- ▸ Structural process equipment
Chemicals
- ▸ Process vessels & reactors
- ▸ Agitators & columns
- ▸ Rolled shells
Oil & Gas
- ▸ Pressure vessels & separators
- ▸ Distillation columns
- ▸ Rolled shells
Fertilizers
- ▸ Absorption columns
- ▸ Reaction vessels
- ▸ Heavy plate equipment
Power Generation
- ▸ Boiler drums & headers
- ▸ Pressure parts
- ▸ Heat exchangers
Heavy Engineering
- ▸ Heavy fabrication
- ▸ Rolled components
- ▸ Structural process equipment
Get in Touch
Ready to discuss your project?
Send us your drawings or a brief description and we'll respond within one business day.
Get in Touch →